Pictures here:
http://picasaweb.google.com/the.souloist/MustangParts#
Odds and ends (get this stuff out of my garage! or i will throw them out shortly)
Heater box/core, out of a '84 capri $25
Grey hatch interior plastics out of a '86 gt, console, front seatbelts, carpet (dirty i think) and hatch carpet $100 (see photo album for more pics)
'83 capri brake booster & MC (pretty rusty) $15
SVO MC $10
4 lug front spindles/rotors/brakes $15
Firewall grommet for steering shaft $5
https://lh6.googleusercontent.com/_a...0/DSC00863.JPG
speedo cluster $10
8.8 rear end with Moser 31 spline 4 lug axles/3" studs, C-clip eliminator, 3.73 gear, Strange Spool $600
Brand new FRPP 3.73 gears $140
Set of Racecraft 2" Dropped 94-95 spindles with NEW SN95 hubs (was on a road race build ran for 50 miles then parted out).
Spindles were $500 and hubs were $100. $400 for the pair
Brand New PBR Brake kit for Fox Body, 11.6" vented rotors, pads, SS lines. Never had any fluid in these.
$300
Autometer 5" Tach with shift light $100
Hurst Quarter Stick shifter - Reverse manual, TH250/350/375/400, shift knob is cracked and taped on - $100
Suspension:
V8 Springs - $30 - front and uncut rears
V8 Springs - $20 - front and cut rears
Brand New 2003 Cobra Terminator a-arms with prothane bushings - $300 (needs one new balljoint, torn)
Tokico HP Shocks HE3608 $55
Fox body LSx swap long tube headers $200
Not clean, not coated, some massaging done, but they get the job done. needs one small hole to be welded shut. Stock steering shaft and k-member with modded mounts were used with these headers.
FS: Fox parts, Built 8.8, Grey interior, LSx Swap, Tires, Autometer, Springs, A-arms
Linear Mode
