need help with slick size on a stang

88 gt · 02-24-2007, 03:21 PM

will a 10.0/27.0X15 tire on a 15 by 8in weld rim fit with out rolling the 1/4 lips.i know ill need to take the quad shock off but i dont want to mess with the 1/4s.thanks everyone for the help .Lon

**Casper302** · 02-25-2007, 12:19 AM

IS the car stock ride height?

If so I assume you could get away with it.

Only way to tell is to test fit them if possible.

88 gt · 02-25-2007, 12:21 AM

Quote:

Originally Posted by Casper302

IS the car stock ride height?

If so I assume you could get away with it.

Only way to tell is to test fit them if possible.

the car is stock ride height.the tires are 10.0/27.0X15's

88 gt · 02-25-2007, 12:30 AM

lol there are low profile tires on them now,they were on the rims when i got them.i can get them slicks for 80 bucks but if i need to roll the 1/4s i need to find a set that will fit.if someone has a cheep set let me know.car looks dumb with the tires that are on it now

.

**BigWheelinBubba** · 02-25-2007, 06:55 AM

Depends on the rim backspace but they should fit.

fast89gt · 02-25-2007, 11:58 AM

Quote:

Originally Posted by 88 gt

will a 10.0/27.0X15 tire on a 15 by 8in weld rim fit with out rolling the 1/4 lips.i know ill need to take the quad shock off but i dont want to mess with the 1/4s.thanks everyone for the help .Lon

Lon what are you trying to do now!!

i use a 15x8 rim with 5.5 backspace i first had 26x10 they worked good but i had taken out the quad shocks now you have seen what i have 28x10 i had to rool the lips a little bit im not sure about the 27 tall tire you just have to check for your self