Register FAQ/Rules Image Hosting Members List Calendar Forum Home

Go Back   Detroit Racing Forums > RSS NewsFeeds > Street Legal TV Newsfeed

» Sponsors
Support Our Sponsors
Reply
Thread Tools Display Modes
Unread 06-09-2010, 05:32 PM   #1
NewsBot
Registered User
Senior Member
 
Join Date: Jun 2010
Posts: 47,174
NewsBot I need rep points!
Default Ford Now Offering Over 9,000 Reproduction Car Parts

Countless numbers of cars have been built over the past century. While most have gone to the crusher, many managed to survive destruction and wound up in the hands of devoted caretakers. But even the most looked-after car can be involved in an accident, and not necessarily on the road. House fires, hurricanes, and neglect can all take its toll on cars. Eventually, nearly every car needs some sort of restoration, but finding parts can be an almost impossible task.

But, if you’re a Ford owner, you’re in luck. The Blue Oval now makes over 9,000 reproduction parts, from the smallest piece of trim to entire reproduction bodies of cars like the Mustang.


Picture: Just Sheet Metal

As one of the oldest companies in continuous operation in America, Ford has literally built millions of cars for generations of loyal customers. Nearly everyone has owned a Ford at one point in their life or another. While the Internet has been a huge boon to many enthusiast seeking hard-to-find parts, some things are just better off bought new. That is where Ford comes in.

Ford offers over 9,000 reproduction parts, made by companies liscened by Ford using the original factory tooling. For example, you can almost literally build an entire 1967 fastback Mustang from scratch using Ford-licensed reproduction parts, including an all-steel body. Ford has repo parts dating all the way back to 1909 when the Model T was the most popular and prolific car in the country. Ford isn’t done either; later this year they are offering an all-steel 60’s Bronco body for restorers of this classic mudder. We wonder what other vehicles they plan to bring back?

PRESS RELEASE

Ford restoration parts licensing program offers a portfolio of more than 9,000 parts for vehicles from 1909 to the early 2000s
Enthusiasts can now build nearly a complete 1967 Mustang from the ground up using brand-new reproduction components. About 98 percent of the Mustang's parts are being reproduced.
Many parts are manufactured on original Ford tooling, then carefully checked against original blueprints to ensure quality and aesthetics before being offered for sale

DEARBORN, Mich., June 7, 2010 – As Father's Day approaches, Ford is proud to support the millions of enthusiasts nationwide who keep antique and classic Ford-built vehicles on the road. And nowhere is that support more evident than through the official Ford licensed restoration parts program.

With a growing parts portfolio containing more than 9,000 part numbers, the program licenses parts for Ford-built vehicles from the Model T to those made as recently as the early 2000s. Every component is produced by one of the officially licensed suppliers, made to Ford Motor Company standards using original factory tooling. No longer do enthusiasts have to spend hours online looking for rare new old stock parts, nor do they have to wander through scrap yards looking for used parts for their classics. Chances are the part is available new and just a mouse click away.
The program is so comprehensive that an enthusiast can actually construct a "new" vintage Ford using reproduction parts.

"You can literally build a 1967 Mustang using officially licensed Ford restoration parts right from your computer, without ever visiting a wrecking yard," says Dennis Mondrach, Restoration Licensing manager, Ford Component Sales (FCS). "Complete steel bodyshells are available, Ford Racing can supply crate motors, and specialty manufacturers make all the hardware, drivetrain, interior parts and even instruments with classic or customized faces. You can build your car as a classic or upgrade the components you choose."

Ford currently offers four complete Mustang bodies covering 1967 to 1970. Later this fall, Ford will introduce its first truck-based body for restorers of the classic 1960s Bronco.

The strict licensing process helps ensure any parts bearing the company's official trademarks meet the quality standards and authenticity that classic Ford enthusiasts demand. Each approved part comes with a blue-and-white sticker with the Ford logo stating it is an officially licensed restoration part. That means the fit, function and appearance is as authentic as the original.

"When Ford stops making a part and retires the tooling, that tooling is offered to FCS," explains Mondrach. "Based on the type of component and whether we think it would be of interest to the vintage vehicle market, we then offer it to one of our 75 licensed manufacturers and they put the tooling back into service.

"The end result," Mondrach says, "is that owners of vintage Ford vehicles get a source of factory-correct parts made on Ford tooling."

Restoring a classic Ford-built vehicle in the family garage has been an American tradition for decades. Tens of thousands of fathers have shown their sons and daughters how to restore a car using a Model A, Model T, Thunderbird, Mustang or F-Series. According to Hagerty Collector Car Insurance of Traverse City, Mich., the worldwide leader in collector car insurance, four Ford-built vehicles are among the top 10 most popular cars it insures. Mustang, for example, is No. 2 on this year's list, according to Hagerty.

Accurate reproduction parts make the restoration process easier, and for those enthusiasts who decide to show the finished product, they can make the difference between a trophy and an empty-handed trip home. The Ford licensing program has been singled out for special recognition from both the Mustang Club of America and the Thunderbird Club of America for supplying components identical to original Ford parts.

"Before a supplier can sell a licensed part – even one produced on Ford tooling – they are required to submit a sample for approval," said Mondrach. "We compare the sample to original blueprints and engineering specifications and ensure the part meets or exceeds the original piece in quality, aesthetics and functionality."

All Ford restoration parts licensees must successfully complete a quality assurance survey and meet all federal and state safety regulations. To assist in the monitoring of ongoing production quality, master samples of each restoration part are retained after approval and used as quality benchmarks for future production runs.

FCS tries to ensure a supply of frequently needed components is available to the restoration community, particularly interior parts and delicate trim pieces.

"We really try to provide the common parts that might be damaged or lost in an accident," explained Mondrach. "Many of those plastic and metal parts look exactly like the originals and are made on original tooling, but benefit from improved plastics and metallurgy, resulting in a higher-quality component than what was originally supplied on the vehicle."

On the other hand, Ford licensed restoration suppliers also reproduce very specialized components – in specialized original materials – for some of the first Ford products to hit the road.

"We license original Model A and T parts like the famous ah-ooga horn and many unique brass parts," said Mondrach. "Model T enthusiasts can even get licensed replacement handmade brass radiators.

"Whether you're rebuilding a classic Ford, Lincoln, Edsel or Mercury from scratch, or simply prepping your vintage vehicle for its next show," he adds, "Ford Restoration probably has many of the parts you need."

For more information
Visit the Ford restoration parts website at HYPERLINK "http://www.fordrestorationparts.com" www.fordrestorationparts.com. Select the vehicle make and model in which you're interested to load a list of suppliers with contact information.





More...
NewsBot is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
parts 4 sale ford and some chevy PizzaBoy Classifieds 2 04-27-2010 06:20 PM
Race parts for sale, Ford, Chevy & Mopar. New & used 6PKRTSE Classifieds 20 02-11-2010 01:51 PM
Ford Employee Appreciation Day @ NMRA Milan, MI Promedia Lisa Events 0 04-30-2008 08:39 AM
ford and stang parts for sale need2bfast Classifieds 0 11-03-2006 07:33 PM
stang and ford parts for sale need2bfast Classifieds 0 10-18-2006 09:53 PM

Powered by vBadvanced CMPS v3.2.1

All times are GMT -5. The time now is 08:21 PM.

"Used Ford Mustangs for sale in Detroit"



All posts and images belong to DetroitRacing.net and its owners.