Ok, I need your recommendation on something ASAP! I have a problem with my pool filter...it cracked and sprung a leak. Here is a pitcure of the filter tank...
If you look at the top of the tank itself you will kinda see where the two halves are fused together by the factory. At the very top is where it cracked and it has sprung a BAD leak. I need some kind of glue/adhesive that will be able to stand some pressure, not separate when the pump is turned on, and is also waterproof.
I ahve already tried epoxy (that cracked and seperated after a couple days), syringe epoxy (same result), and a couple other products All the same turnout.
I almost need something that will almost refuse/melt the pieces back together and hold them there...if their is such a thing.
Suggestions? This needs to be fixed today after I get off work.
Repairing plastic, need suggestions ASAP!!
Threaded Mode