nitrous jetting "dry" kits only

[nitrous_bob]

here are some jet configs for a lot of different jettings.
the nos 5115 , zex, and edelbrock for sure , i'm quite positive all dry kits use these same jets

NOS Dry kit jetting:
Nozzle---tee---HP
#42 #67 =75
#47 #53 =100
#52 #62 =125
#67 #42 =150
#73 #42 =175

remember 125 and up requires you to shim the nitrous reg.....

[streetbad]

Originally Posted by nitrous_bob

remember 125 and up requires you to shim the nitrous reg.....

How is this done???

[nitrous_bob]

sorry for the late reply....

pop the nitrous reg apart and it goes under the spring.

you can just use a washer...it needs to be .040" thickness, the actual part number from NOS is # 17933-snos

[357windsor]

How about for the 'wet' kit set-ups? (Cheater,etc)

[1Quick88]

Originally Posted by 357windsor

How about for the 'wet' kit set-ups? (Cheater,etc)

yes how about those as i will be installing one before summer

[speedy]

Originally Posted by 357windsor

How about for the 'wet' kit set-ups? (Cheater,etc)

You can go to NOS http://www.holley.com/division/NOS.asp#75 site and get all the instruction for all there kits. There PDF files. Here is the jetting for a cheater.

63/71 = 150hp
73/82 = 180hp
82/91 = 210hp
93/102 = 250

heres the complete instructions for the cheater system

http://www.holley.com/data/Products/...A5051-SNOS.pdf

[357windsor]

Originally Posted by speedy

You can go to NOS http://www.holley.com/division/NOS.asp#75 site and get all the instruction for all there kits. There PDF files. Here is the jetting for a cheater.

63/71 = 150hp
73/82 = 180hp
82/91 = 210hp
93/102 = 250

heres the complete instructions for the cheater system

http://www.holley.com/data/Products/...A5051-SNOS.pdf

Cool thanks!

[last5liter]

Originally Posted by nitrous_bob

here are some jet configs for a lot of different jettings.
the nos 5115 , zex, and edelbrock for sure , i'm quite positive all dry kits use these same jets

NOS Dry kit jetting:
Nozzle---tee---HP
#42 #67 =75
#47 #53 =100
#52 #62 =125
#67 #42 =150
#73 #42 =175

remember 125 and up requires you to shim the nitrous reg.....

How does this compensate for different size injectors? (I.E. #19, #24, #30)

Unless this chart is assuming your using stock size #19 iinjectors.

[nitrousmaster]

Originally Posted by last5liter

How does this compensate for different size injectors? (I.E. #19, #24, #30)

Unless this chart is assuming your using stock size #19 iinjectors.

Will it be the same jets for the 30 injectors??

[red347lx]

Originally Posted by nitrousmaster

Will it be the same jets for the 30 injectors??

Arent you the "nitrousmaster"? j/k

[nitrousmaster]

Originally Posted by red347lx

Arent you the "nitrousmaster"? j/k

nothing else to do???