Detroit Racing Forums - View Single Post - Custom Pistons for a 403 LS2 with LS7 rods and crank

**Fryguy302** · 04-19-2010, 09:22 AM

I have a set of custom forged pistons made by Arias for sale. These are custom built to allow the use of an LS7 crank and LS7 rods in an LS2 or Iron 6.0 block.

The bore is 4.005, and they are flat tops. There is enough meat in the piston top to fly cut if you need to. These are actually lighter than the LS7 stock pistons, so they balance out fine with the factory LS7 parts and you end up with a rev happy 402. They come with pins, rings, documentation, etc.

Asking $350 plus shipping, or trade for an LS6 intake or PM me with what else you have. I have a few LS projects in the works. As always, stupid questions will be cheerfully ignored.

04-19-2010, 09:22 AM	#1
Fryguy302 SPOOLED UP! Administrator Join Date: Jul 2005 Location: Oxford, MI Posts: 1,897	Custom Pistons for a 403 LS2 with LS7 rods and crank I have a set of custom forged pistons made by Arias for sale. These are custom built to allow the use of an LS7 crank and LS7 rods in an LS2 or Iron 6.0 block. The bore is 4.005, and they are flat tops. There is enough meat in the piston top to fly cut if you need to. These are actually lighter than the LS7 stock pistons, so they balance out fine with the factory LS7 parts and you end up with a rev happy 402. They come with pins, rings, documentation, etc. Asking $350 plus shipping, or trade for an LS6 intake or PM me with what else you have. I have a few LS projects in the works. As always, stupid questions will be cheerfully ignored. Attached Images __________________ 11 Mustang GT (Street Car) 87 Grand National (Race Car)