Detroit Racing Forums

Detroit Racing Forums (http://www.detroitracing.com/forums/index.php)
-   The Bodyshop (http://www.detroitracing.com/forums/forumdisplay.php?f=38)
-   -   Garage Exaust fan project (http://www.detroitracing.com/forums/showthread.php?t=7658)

orangejuiced86 06-17-2010 08:55 PM

Garage Exaust fan project
 
I know some guys are very into their garages around here so I thought I would just share what I did today. I am going to build a filter box tomorrow. My wife always gets nervous when I actually take a day off of work as she never knows what I am going to do. I cant seem to sit still...



Anyways enjoy..


http://i175.photobucket.com/albums/w...ced86/fan1.jpg
http://i175.photobucket.com/albums/w...ced86/fan2.jpg
http://i175.photobucket.com/albums/w...ced86/fan3.jpg
http://i175.photobucket.com/albums/w...ced86/fan4.jpg
http://i175.photobucket.com/albums/w...ced86/fan5.jpg
http://i175.photobucket.com/albums/w...ced86/fan6.jpg

BB71Mopar 06-17-2010 09:43 PM

You are a little shorter than I remember and I see you grew your hair out :D

What type of filters are you going to use?

1BADAIR 06-17-2010 10:35 PM

i need one of those for the bathroom

orangejuiced86 06-18-2010 09:50 PM

http://i175.photobucket.com/albums/w...86/filter2.jpg
http://i175.photobucket.com/albums/w...86/filter3.jpg
http://i175.photobucket.com/albums/w...86/filter4.jpg
http://i175.photobucket.com/albums/w...86/filter5.jpg
http://i175.photobucket.com/albums/w...86/filter6.jpg

slickstang 06-22-2010 10:30 AM

looks good

orangejuiced86 06-22-2010 12:53 PM

Thanks. I primed a fender the other day and very little overspray was floating while I was spraying so it appears to work ok.

Rickety 12-09-2010 01:42 PM

Those cans on yer bench are in the SAME SPOT from June???? You never swept up yer mess either....

meatbag 12-11-2010 05:17 PM

Hey that's a really cool setup were did you get that fan from.I was gonna do it with a attic fan but i think they pull to much.

orangejuiced86 12-13-2010 09:35 AM

Quote:

Originally Posted by Rickety (Post 101164)
Those cans on yer bench are in the SAME SPOT from June???? You never swept up yer mess either....

I dont wanna stir up any dust, so I leave everything alone


Quote:

Originally Posted by meatbag (Post 101235)
Hey that's a really cool setup were did you get that fan from.I was gonna do it with a attic fan but i think they pull to much.

This fan is rated at 7k cfm, which I think is slightly exaggerated, but I have 6 vents on the other end and it is still unable to work to its fullest potential. I put an additional 4 roof vets up top and 2 vents in the back wall. The shutter wont fully open unless I crack the side door.

I purchased the fan from Northerntool.com it was like $250 or something.

I almost wish I would have just installed a small window in the front of the garage that I could insert a filter in, but in the winter the fresh air all has to run past the tube heater I have hanging so it kind of works better for winter projects.


All times are GMT -5. The time now is 05:50 AM.


All posts and images belong to DetroitRacing.net and its owners.